How is the round hole needle arrangement connected by "needle arrangement manufacturer"?

Technical parameters of round hole bushing:

AMP round hole bushing for electrical functions with an extra voltage of 250VAC and A maximum current of 7.5a. AWG18 to AWG22 wires with a maximum insulation diameter of 0.118 inches are suitable for socket contacts. The initial resistance of 10 m Ω, resistance to 20 m Ω after all. Durability up to 50 times plug and pull. The product can be used in conjunction with other similar programs. Together, the product also has a high - standard one - jack and pin - seat type. This type of current carrying capacity can be increased to 8A. The product complies with ELV and RoHS specifications and is suitable for lead-free treatment skills. Patch connector This AMP AMP round hole busbar is equipped with a build judge device to ensure a useful connector judge. Determine the pin orientation to avoid household electrical circuit board perfusion or other surface treatment interference. The pin seat is chosen with a compact plan to achieve side-by-side stackable, contributing to forward printed circuit board flexibility and density. The 0.156 and 0.200 inch types of the product provide 2 to 12 connection directions, and the 0.312 type provides 2 to 5 connection directions. Products with distances of 0.156 and 0.200 inches are available in 2 to 12 digits, and products with distances of 0.312 inches are available in 2 to 5 digits.

The utility model about a kind of round hole rows mother round hole mother of suppliers, the connector of the connector on the insulation of the seat body is equipped with the supplier for the default wire placement positioning slot, and we have with external insulation block body side connector butt joint, and is equipped with multiple positioning round on joint contact terminal terminal suppliers, and each have a contact terminal end through the insulation block within the body to pay trough with preset welding wire connection, its characteristic is that the multiple contact terminal is transverse U shape, its all contact with the bottom of the terminal is equipped with a longer distance and locate at the trough the medial surface of welding, The contact terminal is also provided with a contact part which is inverted upward bending and surrounds the periphery of the joint, and one end of the contact part is connected with the welding part. With this plan, it can reduce the height of the connector, secure the contact terminal, easy to grasp the contact area, excellent contact function and low impedance.